Troubleshooting Tips - Omron FULL BODY SENSOR BODY COMPOSITION MONITOR AND SCALE HBF-516 Instruction Manual

TROUBLESHOOTING TIPS

PROBLEM
Low Battery Indicator
No power
No display appears on the unit
Measurement does not start.
Measurement results are slow to appear.
The weight value is displayed abnormally low or
high.
The Body Composition value is displayed
abnormally low or high.
Other conditions
CAUSE AND SOLUTION
Check the battery installation for proper placement
of the battery polarities.
Replace all four worn batteries.
The memory data is being updated. (" " appears
in the lower area of the display.)
Wait one minute, then try again.
If you take a measurement when the date will
change during the course of the measurement, it
may take longer than normal for the measurement
results to be displayed. (" " appears in the lower
area of the display.)
Wait for the results to be displayed.
Place the monitor on a hard and level floor.
Refer to RECOMMENDED MEASUREMENT
TIMES on pages 12 and 13.
Check the settings entered for your personal data.
Remove the batteries. Wait one minute.
Reinstall the batteries. Refer to BATTERY
INSTALLATION on page 17.
38