Lumie Bodyclock Advanced 200 Operating Instructions Manual page 9

English
13 Setting the sunset to end as a
nightlight
Rather than have the sunset end in darkness, you can set it to
act as a nightlight at 10% of the intensity of the lamp.
A must be OFF (button depressed).
Press P until program message
Immediately press
Press P to move on to the next setting or wait 12 seconds for the
clock to revert to normal.
14 Adjusting the brightness of the clock
display
The
DISPLAY AUTO
sleep time (when the light is at a low level and the wake-up or
sunset sequences are set).
To set the display to remain bright, then...
A must be OFF (button depressed).
Press P until the program message
Immediately press
Press P to move on to the next setting or wait 12 seconds for the
clock to revert to normal.
NITELITE OFF
-
+
or until
NITELITE ON
mode automatically dims the display at
-
+
or until
DISPLAY HIGH
www.lumie.com
appears.
is set.
DISPLAY AUTO
is set.
| lumie careline 0845 658 9292
appears.
| 9