Demo Mode; Problem Solving - Lumie Bodyclock Advanced 200 Operating Instructions Manual

English
17

Demo mode

To demonstrate the Bodyclock Advanced's sunrise and sunset
functions continuously, in short 4 minute cycles (rolling
demonstration mode).
A must be OFF (button depressed).
+
Press for about 12 seconds until you hear a beep and the
program message reads
To stop the demonstration press
until you hear 2 beeps and the program message goes blank.
You might want to disable the beeper (see 11) before starting this
mode.
For a demonstration mode in which the Bodyclock Advanced
operates as normal except the sunrise and sunset take only 2
minutes, set
P then press
18

Problem solving

The light will not come on but the clock still works.
Check to make sure the bulb is fully screwed into the socket. If
this fails, try replacing the bulb.
Neither the clock nor the light works, or the clock is not doing
what I expect it to.
Turn the power off at the wall. Now press and hold P as you
turn the power back on. This re-sets all the program options to
their default state. If this fails, check the fuse in UK plugs.
Please call the Lumie Careline (0845 658 9292) if you have any
other problems with the Bodyclock Advanced, before doing
anything else.
SUNSET
FADEUP DEMO
+
briefly to start a sunrise.
www.lumie.com
.
+
again for about 12 seconds
(see 9). In this mode press and hold
| lumie careline 0845 658 9292 | 11