oticon DUAL Instructions For Use Manual page 18

Replace the wax protection system
1. Remove the tool from the shell. The tool has two ends, one with a new filter (A) and
one with the removal tool (B).
2. Insert the removal tool into the sound outlet of the Micro Mould.
3. Pull the used wax filter out slowly keeping the tool straight.
4. Turn the tool 180°.
5. Push the new filter into the sound outlet and gently remove the tool.
6. Discard the used tool. Do not reuse.
The wax filter should be changed:
• When you can see that the filter placed in the Micro Mould is clogged.
• When the hearing device does not sound normal.
Use WaxStop protection systems only!
18