Preparation - Omron MX3 Plus Manual

3 Preparation

Insert batteries
1 Slide off the battery cover.
Connect cuff
1 Insert air plug in air jacket.
G Air tube
L Ring
2 Pass the end of the cuff through the ring.
Caution! Keep the air tube on the
outside!
G L
2 Insert four batteries as indicated in the
battery compartment and close
compartment
Caution! Use four identical 1.5V
alkaline batteries type AA LR6!
Fit cuff
Caution! Do not inflate the cuff when not
wrapped around the arm!
1 Bare your arm.
Caution! Push up your sleeve: avoid
constricting the blood flow!
3 Put your arm through the loop.
Note: keep the tube even with your
middle finger.
MX3 Plus English
1-2 cm
3