HP Compaq Pro 4300 All-in-One Hardware Reference Manual page 30

12.
Slide the hard drive out of the cage.
Figure 2-28
13.
Slide the new hard drive into the cage, making sure that the connectors on the hard drive are at
the opening of the cage.
Figure 2-29
NOTE:
drive (SED), you must mount that drive in a drive adapter, and then install the assembly in the hard
drive cage as you would a 3.5-inch hard drive. The drive adapter may be part of the drive kit, or
you may need to purchase it separately. It is recommended that you purchase a drive kit from HP
that is designed to operate with the computer.
24 Chapter 2 Hardware Repair and Upgrade
Removing the Hard Drive from the Cage
Sliding the Hard Drive into the Cage
If you choose to install an optional 2.5-inch solid state drive (SSD) or self-encrypting