A Message Appears In The Display At The End Of The Programme - Miele TX2070 Operating Instructions Manual

A message appears in the display at the end of the programme

Message

Align the machine
The messages will appear at the end of the programme and when the washing
machine is switched on and need to be confirmed with the OK sensor.
Cause and remedy
The smoothing process which the laundry undergoes
at the end of the programme could not be carried out
properly.
 Check whether the washing machine is aligned
correctly as described in "Installation and connec-
tion - Levelling the machine".
 Check whether the maximum delivery height of
1 m has been exceeded.
If the fault message appears again, contact the Ser-
vice Department. The washing machine can still be
used but with reduced functionality.
Problem solving guide
59