User Manual Table of Contents Page Introduction to the Comfort Digisystem Functions of the Microphone DM-10 Getting Started First Time Use Menu More Functions Radio Range and Channels Original Accessories Trouble Shooting Service and Warranty Technical Data Important Safety Instructions...
The products are easy to use, whether you use a hearing aid or not. Before using the product, please read this User Manual carefully. Using the Microphone DM-10 transmitter, the signal is transferred digitally, resulting in an excellent clear sound. Comfort Digisystem is fitted with SecureStream...
Functions of the Microphone DM-10 Pairing button Function button Menu control Input for external sound source Function indicator Charging socket On / Off Microphone Clips Display Microphone DM-10 Microphone DM-10...
Getting Started Charging The Microphone DM-10 is chargeable. Charge the DM-10 at least two hours before you use it for the first time. An empty battery is fully charged within two hours. During charging, the function indicator shows red and a lightning bolt appears through the battery symbol in the display.
It works best within approx. 30 cm. The clip-on-microphone can be attached to your clothes with its clip. DM-10 can be attached with its clip or carried around the neck with the delivered neck loop (2 lengths available). Other functions are explained later in this manual.
Three different selections can be made: Scroll up Press/select Scroll down To access the menu, press the menu control: Back Communication Channel Pairing Function Silence button Push to talk Push/Cont. FCR indicator Settings PIN-code Charging Language Name Input Key lock About Microphone DM-10...
Page 8
All transmitters and receivers are default paired at the factory and will work together. To prevent eaves- dropping, a new code key must be generated and trans- mitted between the units by pairing. Transmitting/receiving of pairing information along with a Microphone DM-10...
Page 9
You can activate the Pairing function via the pairing Pairing button. One brief press of the button opens the menu. Two brief presses activate the Send info function. One long press activates the Receive info function. Microphone DM-10...
In this setting you can shut off the microphone so that no sound is sent when you press the function button. Push to talk DM-10 only sends when you press the function button. Push/Cont In this setting DM-10 works like described above under...
Page 11
DM-10 are set on Push to talk. If transmission is not possible, this is shown in the dis- play together with the function indicator. Is the function button pressed in and transmission is not possible, press the function button again and try to send again (it is not enough to keep the button pressed).
Page 12
Key lock Here you can activate the key lock and thereby lock all buttons. Once the key lock has been activated, Unlock keys? appears in the display. Select Yes to unlock. About Here you find software information. Microphone DM-10...
(how to use Function FCR, see section ), the function indicator shows red. Is FCR indicator activated, the function indicator shows red when the channel is occupied. When using the function silence button, the indicator shows red. Microphone DM-10...
Page 14
Coloured clips A number of different coloured clips are available to replace the black cover. This might be useful if you use several microphones at the same time. Microphone DM-10...
A-F, which require a licence in most European countries: A 768 - 790 MHz B 854 - 863 MHz C 790 - 800 MHz D 800 - 820 MHz E 820 - 854 MHz F 865 - 872 MHz Microphone DM-10...
Several charging stands can be connected and used with one charger. If you use more than two charging stands, a bigger charger is necessary. Desk stand Desk stand for the Microphone DM-10. For other accessories, please visit our website, www.comfortaudio.com Microphone DM-10...
Check that the transmitter and receiver are set to the same channel. Loud hissing noise (no sound transfer) Check that the units are paired. The unit will not start during charging Disconnect the charger. Check the selection Auto power off under Charging in the menu. Microphone DM-10...
Under normal use, battery lifetime is up to five years. Contact your point of purchase once it is time to change the battery. You are always welcome to contact us at Comfort Audio if you have any questions. Technical Data Type of transmitter: SST –...
10) Only use attachments/accessories specified by Comfort Audio AB. 11) Unplug this apparatus during Iightning storms or when unused for long periods of time. 12) Refer all servicing to qualified service personnel.
Page 20
19) Never charge product in closed, unaired spaces such as handbags, cases or other closed storage bags. 20) Only use batteries and power supply specified by Comfort Audio AB. 21) You must not change the battery yourself; please contact your point of purchase.
Need help?
Do you have a question about the DM-10 and is the answer not in the manual?
Questions and answers