Yamaha YZF-R3 Owner's Manual page 25

Average fuel consumption display
1
1. Average fuel consumption display
The average fuel consumption display
can be set to either "AVE_ _._ km/L" or
"AVE_ _._ L/100 km".
This display shows the average fuel
consumption since it was last reset.
 "AVE_ _._ km/L": The average dis-
tance that can be traveled on 1.0 L
of fuel is shown.
 "AVE_ _._ L/100 km": The average
amount of fuel necessary to travel
100 km is shown.
To switch between the average fuel
consumption displays, push the "SEL"
button for one second.
To reset the average fuel consumption
display, push the "RES" button for at
least one second.
Instrument and control functions
TIP
After resetting the average fuel con-
sumption display, "_ _._" is shown until
the vehicle has traveled 1 km (0.6 mi).
Oil change tripmeter
1 2
1. Oil change indicator "OIL"
2. Oil change tripmeter
The oil change tripmeter shows the
distance traveled since it was last reset
(i.e., since the last oil change).
The oil change indicator "OIL" will flash
at the initial 1000 km (600 mi), then at
5000 km (3000 mi) and every 5000 km
(3000 mi) thereafter to indicate that the
engine oil should be changed.
4-8
After changing the engine oil, reset the
oil change tripmeter and the oil change
indicator. To reset them both, select
the oil change tripmeter, and then push
the "RES" button for one second.
Then, while "OIL" and the oil change
tripmeter are flashing, push the "RES"
button for three seconds. The oil
change indicator will be reset.
If the engine oil is changed before the
oil change indicator comes on (i.e., be-
fore the periodic oil change interval has
been reached), the oil change tripmeter
must be reset for the next periodic oil
change to be indicated at the correct
time.
4