Yamaha YZF-R3 Owner's Manual page 27

2. Push the "SEL" button to confirm
the selected engine speed. The
control mode changes to the de-
activation point setting mode.
To set the deactivation point
TIP
 The shift timing indicator light de-
activation point can be set be-
tween 7000 r/min and 13500
r/min. From 7000 r/min to 12000
r/min, the indicator light can be set
in increments of 500 r/min. From
12000 r/min to 13500 r/min, the in-
dicator light can be set in incre-
ments of 200 r/min.
 Be sure to set the deactivation
point to a higher engine speed
than for the activation point, other-
wise the shift timing indicator light
will not come on.
1. Push the "RES" button to select
the desired engine speed for de-
activating the indicator light.
2. Push the "SEL" button to confirm
the selected engine speed. The
control mode changes to the
brightness setting mode.
Instrument and control functions
To adjust the brightness
1. Push the "RES" button to select
the desired shift indicator light
brightness level.
2. Push the "SEL" button to confirm
the selected brightness level. The
display exits the shift timing light
control mode and returns to the
standard multi-function display
mode.
Self-diagnosis device
1. Engine trouble warning light ""
2. Error code display
This model is equipped with a self-di-
agnosis device for various electrical
circuits.
4-10
If a problem is detected in any of those
circuits, the engine trouble warning
light will come on and the display will
indicate an error code.
NOTICE
If the display indicates an error
code, the vehicle should be checked
as soon as possible in order to avoid
engine damage.
km/h
ECA11591
4