Yamaha YZF-R3 Owner's Manual page 22

Instrument and control functions
Tachometer
4
1. Tachometer
2. Tachometer red zone
The tachometer allows the rider to
monitor the engine speed and keep it
within the ideal power range.
When the key is turned to "
chometer will sweep across the r/min
range and then return to zero r/min in
order to test the electrical circuit.
NOTICE
Do not operate the engine in the ta-
chometer red zone.
Red zone: 12500 r/min and above
Clock
km/h
km/L
L/100km
1. Clock
The clock displays when the key is
turned to " ".
To set the clock
", the ta-
1. Turn the key to "
2. Push the "SEL" button and "RES"
button together for at least two
seconds.
ECA10032
3. When the hour digits start flash-
ing, push the "RES" button to set
the hours.
4. Push the "SEL" button, and the
minute digits will start flashing.
5. Push the "RES" button to set the
minutes.
6. Push the "SEL" button and then
release it to start the clock.
Fuel meter
1
1. Fuel meter
The fuel meter indicates the amount of
fuel in the fuel tank.
When the key is turned to "
play segments of the fuel meter will
". sweep once across the fuel level range
and then return to the current amount
in order to test the electrical circuit.
The display segments of the fuel meter
disappear towards "E" (Empty) as the
fuel level decreases. When the last
segment starts flashing, refuel as soon
as possible.
TIP
This fuel meter is equipped with a self-
diagnosis system. If a problem is de-
tected in the electrical circuit, the fol-
4-5
1
", the dis-