Table of Contents
Advertisement
Optical Remote I/O Systems
Example 3
Optical fiber (APF/PCF)
C-Series PC
with
Optical Host
Link Unit
4-3
Optical Remote I/O Systems
Example 1
CPU Rack with
Optical Master
Optical fiber (APF/PCF)
20
As shown in Example 3, more than one Optical Host Link Unit can be connected
in series using optical fiber cables. However, if any failure (power failure, discon-
nection, etc.) occurs in one of the Units, all the subsequent Host Link Units will
also cease to operate. This can be prevented by using Link Adapters such as the
AL002-(P)E as shown below. These Link Adapters bypass any malfunctioning
Host Link Unit, thereby allowing the rest of the system to operate normally. In
other words, even if a power failure occurs in a Host Link Unit connected to a
branch line of a Link Adapter, signals are still transmitted to the other Host Link
Units.
Host computer
RS-422 or RS-232C
Link Adapter
AL004-(P)E
Link Adapter
Link Adapter
AL002-(P)E
AL002-(P)E
C-Series PC
with
Optical Host
Link Unit
Example 1: In an Optical System, Units can be connected in series. However, if
any failure (power failure, disconnection, etc.) occurs in one of the Units, all of
the subsequent Units will also cease to operate. This can be prevented by using
Link Adapters such as the AL002-(P)E as shown below. These Link Adapters
bypass any malfunctioning Unit connected to a branch line, thereby allowing the
rest of the system to operate normally.
Link Adapter
AL002-(P)E
Optical Link Rack
.
Link Adapter
AL002-(P)E
C-Series PC
C-Series PC
with
Optical Host
Optical Host
Link Unit
Link Unit
Link Adapter
AL002-(P)E
C120 CPU Rack
C120 I/O Link Rack
Section
Link Adapter
AL002-(P)E
Optical fiber (APF/PCF)
C-Series PC
with
with
Optical Host
Link Unit
Optical Slave Rack
4-3
Advertisement
Table of Contents
