Omron F3S-B Specification Sheet page 13

F3S-B
When Using START/RESTART FUNCTION
Emitter
RS--485(A) (Grey 5)
RS--485(B) (Pink 6)
S2
E1
S2: Restart interlock reset switch
J DETAILS OF F39-EU1E OPTIONAL FUNCTION KIT
Preparation
!
Caution
Perform the installation check and the periodical inspection described in the F3S-B manual.
Do not disassemble, repair or modify the F39-E1.
Do not use the F39-E1 in flammable or explosive environments.
To use the F39-U1E software, the following items are necessary.
• Personal Computer (not included)
-- Windows 95, Windows 98, or Windows NT
-- 133MHz Pentium processor or better
-- 32MB RAM or higher for Windows 95 and Windows 98
-- 64MB RAM or higher for Windows NT
-- A 115kBd RS-232 serial interface port or better
•
F39-E1 Interface Unit
35
60
Receiver
K3
114
8
When Using Optional RELAY MONITORING FUNCTION
Emitter
k1
k2
S1
E1
k1, k2: Auxiliary contact to moni-
tor the condition of the final relay
•
F39-JB1C Interface Cable 5 m cable length,
M8 connector (4 pins)
30.5
∅ 15
Round vinyl--insulated cord
5 mm dia. (32/0.1 mm dia.) 4 cores
•
RS-232C Cable (not included)
14
5000