Table of Contents
Advertisement
Figure 8
1. Primer Bulb
2. Move the choke lever to the closed (
move the stop switch to the "ON" position (Figs. 9).
Figure 9
1. Starter Handle
3. Lock the throttle trigger in the fast-idle start position,
then pull the starter handle (Figs. 10).
2. Fuel Return Line
) position and
2. Choke Lever (typical)
Figure 10
1. Stop Switch
2. Fast-idle Lock
3. Throttle Trigger (in
fast-idle start position)
4. After the engine starts, move the choke lever to the
open (
) position, then squeeze and release the
throttle trigger to allow it to return to the idle position
(Figs. 10).
If the engine stops running before you move the choke
lever to the open (
) position:
A. Go ahead and open the choke (Fig. 9).
B. Make sure the throttle trigger is set to the fast-idle
start position (Fig. 10).
C. Pull the starter handle until the engine starts
(Fig. 9).
4. Throttle Trigger (in idle
position)
10
Advertisement
Table of Contents
