JVC EX-A1 Service Manual page 16

3.1.15 Removing the front board
(See Figs.25 and 26)
• Remove the top cover.
• Remove the AL panel L and AL panel R.
• Remove the front panel assembly.
(1) From the forward side of the front panel assembly, pull out
the volume assembly. (See Fig.25.)
(2) From the reverse side of the front panel assembly, remove
the ten screws AA attaching the front board. (See Fig.26.)
(3) Release the two claws aa of the indicator attaching the
front board and take out the front board from the front panel
assembly. (See Fig.26.)
Reference:
When attaching the front board, attach the screw AA after fit-
ting the hole of the front board to the projections ab of the front
panel assembly. (See Fig.26.)
1-16 (No.MB150)
Front panel assembly
Volume assembly
Fig.25
Front board
Projections ab
Projection ab
AA
AA
Front panel assembly
Fig.26
Projection ab
AA
Claws aa
Projection ab
AA