No.mb150)1 - JVC EX-A1 Service Manual

3.1.14 Removing the fan motor
(See Figs.21,23 and 24)
• Remove the top cover.
• Remove the AL panel L and AL panel R.
• Remove the rear panel.
• Remove the switching power unit.
• Remove the main board.
(1) From the top side of the main body, disconnect the wire
from the connector CN703
Fig.23.)
(2) From the back side of the main body, remove the two
screws Z attaching the fan motor to the bracket B. (See
Fig.24.)
(3) Take out the fan motor from the back side of the main body.
Reference:
After attaching the fan motor, fix the wire with the wire holder.
(See Fig.21.)
on the micom board. (See
Wire
Micom board
Fig.23
Bracket B
Z
Z
Fan motor
Fig.24
CN703

(No.MB150)1-15