Marantz CD6006 Owner's Manual page 52

Contents Connections
o No sound comes out
Symptom
No sound is produced. Or
0
sound is distorted.
0
0
0
0
0
o Sound is interrupted or noise occurs
Symptom
During playback from the
0
USB memory device,
sound is occasionally
interrupted.
o Desired sound does not come out
Symptom
Headphone volume is low.
0
Front panel Display
Playback
Check the connections for all devices.
Insert connection cables all the way in.
Check that input connectors and output connectors are not reversely connected.
Check cables for damage.
Check the amplifier's functions and controls and adjust as necessary.
When connecting to a device with digital audio input connectors, set "Digital Out" to "On".
When the transfer speed of the USB memory device is slow, sound may occasionally be interrupted.
Switch "H/P AMP Gain" to "MIDDLE" or "HIGH" if using headphones with high impedance or low
sensitivity.
Rear panel
Settings
Cause / Solution
Cause / Solution
Cause / Solution
52
Remote
Tips Appendix
Page
Page
Page
Index
17
－
－
－
－
45
－
45