Digital Out - Marantz CD6006 Owner's Manual

Contents Connections
H/P AMP GAIN
Set the gain of the headphone amplifier. Set this according to the
impedance of the connected headphones. It is recommended that this is
set on the "LOW" side if the headphones have low impedance and on the
"HIGH" side if they have high impedance.
LOW Set the gain of the headphone amplifier to
(Default): "LOW".
Set the gain of the headphone amplifier to
MIDDLE:
"MIDDLE".
Set the gain of the headphone amplifier to
HIGH:
"HIGH".
NOTE
0 The headphone volume varies depending on the "H/P AMP GAIN" setting.
Decrease the volume or mute the audio first if changing this setting while listening
to audio.
Front panel Display
Playback Settings

Digital Out

Switched the digital audio output on/off.
On
(Default):
Off:
45
Rear panel
Tips
Use the digital audio output connector.
Do not use the digital audio output connector.
Remote Index
Appendix