Timer Play; Resume Play; Using The Timer Play Function - Marantz CD6006 Owner's Manual

Contents Connections

Timer Play

This unit can perform timer play by cooperating with your timer device.
("Connecting the timer device" (v p. 23))
Timer play is set. Select the media mode to
On:
be used for timer play.
Off
Timer play is not set.
(Default):
o Using the timer play function
1. Turn on the power of the connected components.
2. Load a disc or connect an iPod or USB memory device.
3. Switch the amplifier's function to input from the connected unit.
4. Set the audio timer for the desired times.
5. Turn the timer on.
The power of the components connected to the timer turns off.
When the set time is reached, the power of the different components
automatically turns on and playback starts from the first track.
NOTE
0 The timer play does not support the random play or program play.
Front panel Display
Playback Settings

Resume Play

When the media mode is switched, the iPod or USB memory device is
disconnected and then connected, or the power is turned off and then
back on during iPod or USB memory device playback, the unit memorizes
the point where playback stopped (resume information) so that playback
can resume from after that point.
On
(Default):
Off:
NOTE
0 If a different USB memory device is connected, the resume information of the
previously connected USB memory device is cleared.
46
Rear panel
Tips
Resume playback is set.
Resume playback is not set.
Remote Index
Appendix