Marantz CD6006 Owner's Manual page 50

Contents Connections
Troubleshooting
If a problem should arise, first check the following.
1. Are the connections correct?
2. Is the set being operated as described in the owner's manual?
3. Are the other devices operating properly?
If this unit does not operate properly, check the items listed in the table below.
Should the problem persist, there may be a malfunction. In this case, disconnect the power immediately and contact your store of purchase.
o Power does not turn on / Power is turned off
Symptom
Power is not turned on.
0
0
Power automatically turns
0
off.
Front panel Display
Playback
Check whether the power plug is correctly inserted into the power outlet.
This unit is in standby mode. Press the X button on the unit or POWER X button on the remote control.
The Auto Standby mode is set. The Auto Standby mode switches the unit to standby mode when the unit
is not operated for approximately 30 minutes. To disable Auto Standby mode, set "Auto Standby" on the
menu to "Off".
Rear panel
Settings
Cause / Solution
50
Remote
Tips Appendix
Page
Index
24
26
47