Table of Contents
Advertisement
Hob Use (Continued)
• Always position pots and pans before switching on the cooking zone.
EN
• Dirty cooking zones and pan bases increase power consumption.
• When possible, position the lids firmly on the pots and pans to cover completely.
• Switch the cooking zones off before the end of the cooking time to use the residual heat
for keeping foods warm or for thawing .
• The base of the pan should be the same size as the cooking zone.
• Using a pressure cooker reduces cooking times by up to 50 %
Using the touch control sensors
To operate the touch control sensors, touch the desired panel with the tip of your pointed fin-
ger until the relevant displays illuminate or go out, or until the desired function is activated .
Ensure that you are touching only one sensor panel when operating the appliance . If your
finger is too flat on the panel, an adjacent sensor may be actuated as well.
14
Advertisement
Table of Contents
