Device Configuration; Turning On The Chartplotter Automatically; System Settings; Station Settings - Garmin GPSMAP 8400 series Owner's Manual

The icon appears on the video screen.

Device Configuration

Turning On the Chartplotter Automatically

You can set the chartplotter to turn on automatically when the
power is applied. Otherwise, you must turn on the chartplotter by
pressing .
Select Settings > System > Auto Power Up.
NOTE: When Auto Power Up is On, and the chartplotter is
turned off using , and power is removed and reapplied
within less than two minutes, you may need to press
restart the chartplotter.

System Settings

Select Settings > System.
Sounds and Display: Adjusts the display and audio settings.
GPS: Provides information about the GPS satellites and
settings.
System Information: Provides information about the devices on
the network and the software version.
Station Information: Adjusts the setup of the station.
Auto Power Up: Controls what turns on automatically when
power is applied.
Simulator: Turns the simulator on or off and allows you to set
the time, date, speed, and simulated location.

Station Settings

Select Settings > System > Station Information.
Change Station: Sets the entire station to a new set of defaults
based on the location of this station. You can also select to
use this display as a stand-alone, individual display, instead
of grouping it with other displays to make a station.
GRID™ Pairing: Allows you to pair a GRID
device with this station.
Display Order: Sets the order of the displays, which is
important when using a GRID remote input device.
Reset Layouts: Restores the factory default view for the layouts
in this station.
Reset Stations: Restores the factory default layouts for all
displays in the station.

Viewing System Software Information

You can view the software version, the basemap version, all
supplemental map information (if applicable), the software
version for an optional Garmin radar (if applicable), and the unit
ID number. You may need this information to update the system
software or to purchase additional map data information.
Select Settings > System > System Information.

Viewing the Event Log

The event log shows a list of system events.
Select Settings > System > System Information > Event
Log.

Audio Settings

You can adjust audible alarms, alerts, and warnings that are
sounded over audio output devices connected through HDMI or
analog output using the NMEA 0183 audio cable.
Select Settings > System > Sounds and Display > Audio
Setup.
Audio Output: Turns on audio for HDMI video and for audio
alerts.
Audio Alerts: Sets which system alarms and alerts are played
over the compatible audio output. The Alarm option indicates
Device Configuration
Audio Alert Device: Sets the FUSION device to control when
Audio Alert Source: Switches the audio to the selected source
Alert Volume: Controls the volume of the alerts.
to

Preferences Settings

Select Settings > Preferences.
Units: Sets units of measure.
Language: Sets the on-screen text language.
Navigation: Sets navigation preferences.
Keyboard Layout: Arranges the keys on the on-screen
Screenshot Capture: Allows the device to save images of the
User Data Sharing: Allows you to share waypoints and routes
Menu Bar Display: Shows or automatically hides the menu bar

Units Settings

Select Settings > Preferences > Units.
System Units: Sets the unit format for the device.
Variance: Sets the magnetic declination, the angle between
North Reference: Sets the direction references used in
™ remote input
Position Format: Sets the position format in which a given
Map Datum: Sets the coordinate system on which the map is
Time: Sets the time format, time zone, and daylight saving time.

Navigation Settings

NOTE: Some settings and options require additional charts or
hardware.
Select Settings > Preferences > Navigation.
Route Labels: Sets the type of labels shown with route turns on
Turn Transition: Adjusts how the chartplotter transitions to the
Auto Guidance: Sets the measurements for the Preferred
Route Start: Selects a starting point for route navigation.
a situation could be hazardous to passengers and requires
immediate action. The Warning option indicates the situation
could be hazardous to equipment on the vessel or the vessel
itself and requires action very soon. All other messages and
information are classified as alerts.
alerts are played. You should select the device that is
connected to the chartplotter audio output.
when an alert is played. You should select the device that is
connected to the chartplotter audio output.
keyboard.
screen.
over the Garmin Marine Network. All chartplotters that share
waypoints and routes must have this setting turned on.
when it is not needed.
magnetic north and true north, for your present location.
calculating heading information. True sets geographic north
as the north reference. Grid sets grid north as the north
reference (000º). Magnetic sets the magnetic north as the
north reference.
location reading appears. Do not change this setting unless
you are using a map or chart that specifies a different
position format.
structured. Do not change this setting unless you are using a
map or chart that specifies a different map datum.
the map.
next turn or leg or the route. You can set the transition to be
based on time or distance before the turn. You can increase
the time or distance value to help improve the accuracy of the
autopilot when navigating a route or an Auto Guidance line
with many frequent turns or at higher speeds. For straighter
routes or slower speeds, lowering this value can improve
autopilot accuracy.
Depth, Vertical Clearance, and Shoreline Distance, when you
are using some premium maps.
41