Connecting With A Hub (Not Included) - Samsung WAM750 User Manual

Connecting with a hUB (not included)

A
• If the product fails to connect to your network or its network connection operates
abnormally, place the product closer to the HUB or your router and try again.
• The product is a wireless network device. Its communications with your network may
be disrupted because of the distance between it and other devices on the network,
obstructions, or interference from other wireless devices.
Connect a LAN cable to the router and the
1
HUB.
note
9 You can connect the LAN cable to any
Attach the HUB's power cord to the power port on the rear of the HUB, and then plug
2
the power cord into an electrical outlet.
The power (
3
When the pairing indicator (
The LED indicator on the product starts to flash.
If the HUB's pairing indicator does not flash, press the
the HUB.
note
9 If you are adding multiple Products, connect all the Product's to electrical outlets. If you are not
connecting all the Products, refer to pages 28~29.
Wireless Router
LAN
POWER
<WAM750, WAM751,
WAM350, WAM351>
) and the HUB (
) begins to flash, plug the product(s) into an outlet.
HUB
<WAM550, WAM551>
ethernet SWitCh
ETHERNET SWITCH
) indicators on the HUB's front turn on.
Click here.
4444 24
SPK ADD WPS
Wi-Fi SETUP
ETHERNET
POWER
DC 14V 2.5A
on the back of the
Port on the HUB.
Spk Add
button on the rear of