Maintenance; Recommended Maintenance Schedule - Toro Groundsmaster 3320 30307 Operator's Manual

Traction unit
Table of Contents

Advertisement

Maintenance

Recommended Maintenance Schedule

Maintenance Service
Interval
After first 10 hours
After first 50 hours
Every 50 hours
Every 200 hours
Every 400 hours
Every 1500 hours
If you leave the key in the ignition switch, someone could accidently start the engine and
seriously injure you or other bystanders.
Remove the key from the ignition before you do any maintenance. Set the wire aside so that it
does not accidentally contact the spark plug.
Maintenance Procedure
• Check PTO Belt Tension
• Check Fan and Alternator Belt Tension
• Change Transmission Filter
• Torque Wheel Lug Nuts
• Check Brake Operation
• Change Engine Oil and Filter
• Check PTO Belt Tension
• Check Brake Operation
• Check Battery Fluid Level
• Check Battery Cable Connections
• Lubricate All Grease Fittings
• Lubricate Brake Cables
• Inspect Air Filter, Dust Cup, and Baffle
• Check Electric Clutch Gap Adjustment
• Check PTO Belt Tension
• Check Fan and Alternator Belt Tension
• Inspect Cooling System Hoses
• Change Engine Oil and Filter
• Check Rear Wheel Toe–In and Steering Linkage
• Change Transmission Filter
• Torque Wheel Lug Nuts
• Replace Air Filter
• Replace Fuel Filter
• Coat Transmission Bypass Pins with Grease
• Adjust Valves and Check Engine RPM
• Replace Moving Hoses
• Replace Safety Switches
• Coolant System – Flush/Replace Fluid
• Replace Hydraulic Oil
Caution
35

Advertisement

Table of Contents
loading

This manual is also suitable for:

Groundsmaster 3320

Table of Contents