Shure ULX-D User Manual page 23

Managing the ULXD Receiver with Wireless Workbench 6
Adding a computer running Wireless Workbench
Visit: www.shure.com/wwb to download Wireless Workbench 6 software.
Managing and Monitoring Receiver Settings
Manage and monitor receiver settings by opening the Monitor
tab in Wireless Workbench. Click on the Settings button to
show or hide the full Properties window.
1. Click on the Monitor tab to view the Device Chooser.
2. From the Device Chooser, click on a channel to select.
3. Click on Properties to open the Properties window.
① RF and Audio Meters
Displays: current levels, band, TV, and TX Overload
② Transmitter Settings
Displays: RF Power, Tx Type, Tx Offset, Tx Lock
③ Frequency Settings
Use drop-down to edit value
④ Encryption Icon
Illuminates when Encryption is enabled
⑤ Receiver Output Mute
Click on the mute button to enable mute
⑥ Receiver Gain Setting
Use drop-down to edit value
⑦ Custom Groups
Click to enter custom group settings
⑧ IR Presets
Click to configure transmitter IR presets
⑨ Utilities Tab
Accesses Utility settings
⑩ Network Tab
Set network mode, view: IP address, Subnet, MAC,
Firmware version
⑪ Advanced RF Settings
Enable High Density mode or Antenna Bias
Viewing the Receiver in WWB6 Inventory
Click on the Inventory tab to view the receiver channels. Double-click on
parameters to enable editing.
Tip: Clicking on the receiver Icon next to the Model flashes the front panel LEDs for remote identification.
Hardware Identify
Hardware Identify is a useful feature for remotely discovering and identifying networked components that appear in WWB6 inventory. For example, individual
receivers located on a stage can be identified remotely in the WWB6 inventory window by pressing the control wheel on the receiver. When the control wheel is
pressed, the corresponding receiver icon in WWB6 will flash to identify the location of the receiver.
6 to the network allows for remote control and monitoring of the receiver.
®
1
9
13
⑫ Encryption
Enable/Disable Encryption
⑬ Frequency Diversity Mode
Enable and Select Frequency
Diversity mode
2
3
4
10
11
12
14
⑭ Audio Summing
⑮ Locks
Locking the Audio Source in Frequency Diversity Mode
WWB6 software offers an option to selectively lock the Frequency
Diversity audio source to a specific transmitter.
Lock the audio source to select the best audio if a problem develops with
one of the channels.
1. Open the monitoring tab.
2. Under FD Audio Source, click on "Lock to" option to select a transmitter
as the audio source.
To restore Frequency Diversity switching, click on the Auto Switch option.
6
5
7
15
Enable and Select Audio Summing mode
Lock/Unlock: Menu, Gain, Power, Scan/
Sync
8
23