Installing Your Device In The Motorcycle Mount; Removing Your Device From The Motorcycle Mount; Mounting Your Device In An Automobile; Getting Started - Garmin zumo 595 Owner's Manual

2
Insert each ball into the double-socket arm.
3
Tighten the knob slightly.
4
Adjust for optimal viewing and operation.
5
Tighten the knob to secure the mount.

Installing Your Device in the Motorcycle Mount

1
Fit the bottom of your device into the cradle.
2 Tilt the device back until it snaps into place.
3
If the latch on top of the mount stays up after you insert the
device, press it down.
Removing Your Device from the Motorcycle
Mount
1
Press the release button on the side of the mount.
2
Lift out the device.

Mounting Your Device in an Automobile

Before mounting the device, check the local laws pertaining to
windshield mounting.
This product contains a lithium-ion battery. To prevent the
possibility of personal injury or product damage caused by
battery exposure to extreme heat, store the device out of direct
sunlight.
Do not use the suction cup mount on a motorcycle.
See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.
2
NOTICE
WARNING
1
Plug the automotive power cable
mount.
2
Remove the clear plastic from the suction cup
3
Clean and dry your windshield and the suction cup with a lint-
free cloth.
4
Press the suction cup to the windshield, and flip the lever
back toward the windshield.
5
Snap the cradle onto the suction cup arm.
6
Fit the bottom of your device into the cradle.
7
Tilt the device back until it snaps into place.
8
Plug the other end of the automotive power cable into a
power outlet.

Getting Started

See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.
• Install the battery (Installing the Battery, page
• Update the maps and software on your device
Updates, page 3).
• Mount the device and connect it to power
page 1).
• Pair your Bluetooth phone and headset
®
and Headset, page 13) (optional).
• Acquire GPS signals (Acquiring GPS Signals, page
• Adjust the screen brightness
Brightness, page 4).
• Navigate to your destination

Device Overview

into the port on the
.
WARNING
3).
(Support and
(Installation,
(Pairing Your Phone
3).
(Adjusting the Screen
(Starting a Route, page
Getting Started
5).