Table of Contents
Advertisement
TIP: if a map update is interrupted or cancelled before it
completes, your device may be missing map data. To repair
missing map data, you must update the maps again using either
Wi‑Fi or Garmin Express.
Updating Maps and Software with Garmin Express
You can use the Garmin Express application to download and
install the latest map and software updates for your device.
1
If you do not have the Garmin Express application installed
on your computer, go to
on-screen instructions to install it
page
21).
2
Open the
Garmin Express application.
3
Connect your device to your computer using a mini-
USB cable.
The small end of the cable connects to the mini-USB port
on your dēzl device and the large end connects to an
available USB port on your computer.
4
When your dēzl device prompts you to enter file transfer
mode, select Yes.
5
In the Garmin Express application, click Add a Device.
The Garmin Express application searches for your device
and displays the device name and serial number.
6
Click Add Device and follow the on-screen instructions to
add your device to the Garmin Express application.
When setup is complete, the Garmin Express application
displays the updates available for your device.
7
Select an option:
• To install all available updates, click Install All.
• To install a specific update, click View Details and click
Install next to the update you want.
The Garmin Express application downloads and installs the
updates onto your device. Map updates are very large and
this process may take a long time on slower internet
connections.
NOTE: if a map update is too large for the internal storage of
the device, the software may prompt you to install a microSD
card in your device to add storage space
memory card for maps and data, page
8
Follow the on-screen instructions during the update process
to finish installing updates.
For example, during the update process, the Garmin Express
application may instruct you to disconnect and reconnect
your device.
Installing Garmin Express
The Garmin Express application is available for Windows
Mac
®
computers.
Device maintenance
garmin.com/express
and follow the
(Installing Garmin Express,
(Installing a
22).
1
On your computer, go to garmin.com/express.
2
Select an option:
• To view the system requirements and verify the Garmin
Express application is compatible with your computer,
select System Requirements.
• To install on a Windows computer, select Download for
Windows.
• To install on a Mac computer, select Download for Mac.
3
Open the downloaded file, and follow the on-screen
instructions to complete the installation.
Device Care
Avoid dropping your device.
Do not store the device where prolonged exposure to extreme
temperatures can occur, as it can cause permanent damage.
Never use a hard or sharp object to operate the touchscreen as
this may result in damage.
Cleaning the outer casing
Avoid chemical cleaners and solvents that can damage plastic
components.
1
Clean the outer casing of the device (not the touchscreen)
using a cloth dampened with a mild detergent solution.
2
Wipe the device dry.
Cleaning the Touchscreen
1
Use a soft, clean, lint-free cloth.
2
If necessary, lightly dampen the cloth with water.
3
If using a dampened cloth, turn off the device and disconnect
the device from the power.
4
Gently wipe the screen with the cloth.
Avoiding theft
• Remove the device and mount from sight when not in use.
• Remove the residue left on the windscreen by the suction
cup.
• Do not keep your unit in the glove compartment.
• Register your device using the Garmin Express software
(garmin.com/express).
Restarting the Device
You can restart your device if it stops functioning.
Hold the power key for 12 seconds.
Removing the Device, Mount and Suction
Cup
Removing the Device from the Mount
1
Press the release tab or button on the mount.
®
2
Tilt the bottom of the device upward, and lift the device from
the mount.
Removing the Mount from the Suction Cup
1
Turn the device mount to the right or left.
2
Apply pressure until the socket on the mount releases the
ball on the suction cup.
Removing the Suction Cup from the Windscreen
1
Flip the lever on the suction cup towards you.
and
®
2
Pull the tab on the suction cup towards you.
NOTICE
NOTICE
21
Advertisement
Table of Contents
