Sharing Trips; Using Suggested Routes; Avoiding Delays, Tolls, And Areas; Avoiding Traffic Delays On Your Route - Garmin zumo 595 Owner's Manual

When you navigate the trip, you should depart by the time
shown under the starting point to reach your stops and
destinations by the scheduled time. The schedule is an estimate
only. Traffic conditions, construction, and other delays may
affect your actual arrival times.

Sharing Trips

You can share trips with compatible Garmin devices using
Bluetooth wireless technology.
1
Place your device within 33 ft. (10 m) of a compatible Garmin
device.
2
Select Apps > Trip Planner >
3 Select a trip and select Done.
4
Select a device from the list and select OK.

Using Suggested Routes

Before you can use this feature, you must save at least one
location and enable the travel history feature
Privacy Settings, page 21).
Using the myTrends ™ feature, your device predicts your
destination based on your travel history, the day of the week,
and the time of day. After you have driven to a saved location
several times, the location may appear in the navigation bar on
the map, along with the estimated time of travel, and traffic
information.
Select the navigation bar to view a suggested route to the
location.

Avoiding Delays, Tolls, and Areas

Avoiding Traffic Delays on Your Route

Before you can avoid traffic delays, you must be receiving traffic
information (Receiving Traffic Data Using Smartphone Link,
page 16).
By default, the device optimizes your route to avoid traffic delays
automatically. If you have disabled this option in the traffic
settings (Traffic Settings, page
traffic delays manually.
1
While navigating a route, select
2
Select Alternate Route, if available.
3
Select Go!.

Avoiding Toll Roads

Your device can avoid routing you through areas that require
tolls, such as toll roads, toll bridges, or congestion areas. The
device may still include a toll area in your route if no other
reasonable routes are available.
1
Select Settings > Navigation.
2
Select an option:
NOTE: The menu changes based on your area and the map
data on your device.
• Select Toll Roads.
• Select Tolls and Fees > Toll Roads.
3
Select an option:
• To be asked each time before routing through a toll area,
select Always Ask.
• To always avoid tolls, select Avoid.
• To always allow tolls, select Allow.
4
Select Save.

Avoiding Toll Stickers

NOTE: This feature is not available in all areas.
The map data on your device may contain detailed toll sticker
information for some countries. You can avoid or allow toll
stickers for each country.
8
> Share > Bluetooth.
(Device and
20), you can view and avoid
> Traffic.
1
Select Settings > Navigation > Tolls and Fees > Toll
Stickers.
2 Select a country.
3
Select an option:
• To be asked each time before routing through a toll area,
select Always Ask.
• To always avoid tolls, select Avoid.
• To always allow tolls, select Allow.
4
Select Save.

Avoiding Road Features

1
Select Settings > Navigation > Avoidances.
2
Select the road features to avoid on your routes, and select
Save.

Custom Avoidances

Custom avoidances allow you select specific areas or sections
of road to avoid. When the device calculates a route, it avoids
these areas and roads unless no other reasonable route is
available.
Avoiding a Road
1
Select Settings > Navigation > Custom Avoidances.
2
Select Add Avoid Road.
3
Select the starting point of the section of road to avoid, and
select Next.
4
Select the ending point of the road section, and select Next.
5
Select Done.
Avoiding an Area
1
Select Settings > Navigation > Custom Avoidances.
2
If necessary, select Add Avoidance.
3
Select Add Avoid Area.
4
Select the upper-left corner of the area to avoid, and select
Next.
5
Select the lower-right corner of the area to avoid, and select
Next.
The selected area is shaded on the map.
6
Select Done.
Disabling a Custom Avoidance
You can disable a custom avoidance without deleting it.
1
Select Settings > Navigation > Custom Avoidances.
2
Select an avoidance.
3
Select > Disable.
Deleting Custom Avoidances
1
Select Settings > Navigation > Custom Avoidances.
2
Select an option:
• To delete all custom avoidances, select .
• To delete one custom avoidance, select the avoidance,
and select > Delete.

Navigating Off Road

If you are not following roadways as you navigate, you can use
Off Road mode.
1
Select Settings > Navigation.
2
Select Calculation Mode > Off Road > Save.
The next route will be calculated as a straight line to the
location.

Fuel Tracking

You can set your device to estimate your fuel usage, warn you
when you approach the maximum estimated fuel distance, and
Navigating to Your Destination