Attaching The Scanned Data To E-Mail Using The Operation Panel Of The Machine - Canon MG5500 series Online Manual

Attaching the Scanned Data to E-mail Using the Operation Panel of
the Machine
You can attach scanned data to an e-mail using the operation panel of the machine.
Before attaching scanned data to an e-mail, confirm the following:
• MP Drivers are installed.
If MP Drivers are not yet installed, install MP Drivers with the Setup CD-ROM or install them from our
website.
• The machine is connected to a computer correctly.
Make sure that the machine is connected to the computer correctly.
Do not plug in or unplug the USB cable while the machine is in operation, or when the computer is in the
sleep or standby mode.
If you perform scanning via a network connection, make sure that all the required settings have been
specified.
Network Scan Settings
• The mail software and the file name are specified in Canon IJ Scan Utility.
You can specify the destination and the file name in Canon IJ Scan Utility. For details on settings of
Canon IJ Scan Utility:
Settings Dialog Box
1. Make sure that the machine is turned on.
2. Select Scan on the HOME screen.
LCD and Operation Panel
The screen for selecting to which you save the data is displayed.
Note
• If the Scan standby screen for forwarding the data to the USB-connected computer is displayed on
the LCD, press the left Function button to display the screen for selecting to which you save the
data.
202