Canon MG5500 series Online Manual page 103

Note
Settings are not retained when you switch modes.
3. Set Input Settings
4. Click Preview.
Preview image appears in the Preview area.
5. Set Output Settings.
6. Adjust the cropping frame (scan area), correct image, and adjust colors
as required.
Adjusting Cropping Frames (ScanGear)
Image Settings
Color Adjustment Buttons
7. Click Scan.
Scanning starts.
Note
Click (Information) to open a dialog box in which you can check the current scan
settings (document type, etc.).
A response of ScanGear after scanning can be specified in Status of ScanGear
dialog after scanning on the
according to the document or purpose.
Scan tab of the Preferences dialog box.
103