Canon MG5500 series Online Manual page 210

4. Select your scanner or printer from Scanners and click OK.
Select the MAC address of your scanner or printer.
Note
When multiple scanners are connected via a network, you can select up to three
scanners.
5. In the Scan-from-PC Settings screen, click OK.
Note
If your scanner or printer does not appear, check the following, click OK to close the
screen, then reopen it and try selecting again.
MP Drivers is installed
Network settings of your scanner or printer is completed after installing the MP
Drivers
Network communication between your scanner or printer and computer is enabled
If your scanner or printer still does not appear, refer to "Problems with Network
Communication" for your model from Home of the Online Manual.
210