Canon MG5500 series Online Manual page 184

You can select up to three scanners and printers in total at the same time. Selecting a
scanner or printer automatically enables scanning from the operation panel.
• Instructions
Opens this guide.
Important
When using a model with which you cannot scan over a network from the operation
panel, Scan-from-Operation-Panel Settings may appear in the Scan-from-PC Settings
screen; however, the setting is not available.
Note
If your scanner or printer does not appear, check the following, click OK to close the
screen, then reopen it and try selecting again.
MP Drivers is installed
Network settings of your scanner or printer is completed after installing the MP
Drivers
Network communication between your scanner or printer and computer is enabled
If your scanner or printer still does not appear, refer to "Problems with Network
Communication" for your model from Home of the Online Manual.
You do not need to use this software when scanning via USB. Refer to
Network Scanner Selector
deleted.
EX" to delete it. You can scan via USB even if it is not
184
"Uninstalling IJ