Wep Details Screen - Canon MX520 series Online Manual

WEP Details Screen

Note
This screen is not available depending on the printer you are using.
Specify the printer WEP settings.
Note
When changing the password (WEP key) of the printer, the same change must be made to the
password (WEP key) of the access point.
1. WEP Key:
Enter the same key as the one set to the access point.
The number of characters and character type that can be entered differ depending on the key
length and key format.
Key Format
2. Key Length:
Select either 64bit or 128bit.
3. Key Format:
Select either ASCII or Hex.
4. Key ID:
Select the Key ID (index) set to the access point.
5. Authentication:
Select the authentication method to authenticate the printer's access to the access point.
Select Auto or Open System or Shared Key.
ASCII
Hexadecimal (Hex)
Key Length
64bit 128bit
5 characters 13 characters
10 digits 26 digits