Canon MX520 series Online Manual page 136

• Bonjour settings
Setting items for LAN using Bonjour for Mac OS.
Enable/disable Bonjour
Selecting Enable allows you to use Bonjour to perform the network settings.
Service name
Specifies the Bonjour service name. You can use up to 48 characters for the name.
Note
You cannot use the same service name as that already used for other LAN connected
devices.
• LPR protocol setting
Activates/deactivates the LPR setting.
• PictBridge communication
Setting items for printing from a PictBridge compliant device.
Enable/disable communication
Selecting Enable allows you to print from a PictBridge compliant device.
Timeout setting
Specifies the timeout length.
• Wireless LAN DRX setting
Selecting Enable allows you to activate discontinuous reception when using wireless LAN. It
allows you to save electricity.
Note
Depending on the access point you are using, discontinuous reception may not be activated
even though Enable is selected.
Discontinuous reception is activated only while the machine is on standby. (The LCD is in
the screen saver mode.)
• Wired LAN DRX setting
Selecting Enable allows you to activate discontinuous reception when the machine is connected
to a device compatible with wired LAN. It allows you to save electricity.
• Reset LAN settings
Initializes the network settings on the machine.
Important
Note that initialization erases all connection settings with computers, and printing or scanning
operation may become impossible. To use the machine over network, perform setup with the
Setup CD-ROM. Be careful when you initialize the network settings on the machine.
Note
When you initialize the network settings using IJ Network Tool:
Initializing the Network Settings of the Machine