Rheem 610340 Owner's Manual And Installation Instructions page 6

ABOUT YOUR STORAGE TANK
HOW DO I KNOW IF THE STORAGE TANK IS INSTALLED CORRECTLY?
Installation requirements are shown on

by a qualified person, and

in accordance with the installation instructions, and

in compliance with Standard AS/NZS 3500.4 and all local codes and regulatory authority requirements.
In New Zealand the installation must also conform to the New Zealand Building Code.
VICTORIAN CUSTOMERS
Notice to Victorian Customers from the Victorian Plumbing Industry Commission. This storage tank must be
installed by a licensed person as required by the Victorian Building Act 1993.
Only a licensed person will give you a Compliance Certificate, showing that the work complies with all the
relevant Standards. Only a licensed person will have insurance protecting their workmanship for 6 years.
Make sure you use a licensed person to install this storage tank and ask for your Compliance Certificate.
DOES THE WATER CHEMISTRY AFFECT THE STORAGE TANK?
The storage tank is suitable for most public water supplies, however some water chemistries may have
detrimental effects on the storage tank, its components and fittings. Refer to
If you are in a known harsh water area or you are not sure of your water chemistry, have your water checked
against the conditions described on pages
HOW LONG WILL THE STORAGE TANK LAST?
The storage tank is supported by a manufacturer's warranty
that will affect the length of service the storage tank will provide. These include but are not limited to the water
chemistry, the water pressure, the water temperature (inlet and outlet) and the water usage pattern. Refer to
"Precautions"
on page 5.
pages 13 to 19 and 24 to
9 to 11.
(refer to page
6
29. The storage tank must be installed:
"Water Supplies"
35). There are a number of factors
on page 9.