Samsung Galaxy S III User Manual page 98

Manually Scan for a Wi-Fi Network
1. From a Home screen, touch
Wi-Fi.
2. Touch Scan.
All available Wi-Fi networks are displayed.
Wi-Fi Status Indicators
The following icons show your Wi-Fi connection status at a
glance:
Displays when Wi-Fi is connected, active, and
communicating with a Wireless Access Point (WAP).
Displays when there is a Wi-Fi access point available
but you are not connected to it. May also display if
there is a communication issue with the target
Wireless Access Point (WAP).
Displays when connected to another device using
Wi-Fi Direct.
91
Apps Settings
Wi-Fi Direct
Wi-Fi Direct allows device-to-device connections so you can
transfer large amounts of data over a Wi-Fi connection.
Note: See your service plan for applicable charges for
Wi-Fi Direct.
1. From a Home screen, touch
Wi-Fi.
2. Touch the OFF/ON button to turn Wi-Fi ON
3. At the bottom of the Wi-Fi screen, touch Wi-Fi Direct.
4. Repeat Steps 1 - 3 on the other device with which you
want to connect.
The steps on the other device may vary depending on
the device. Refer to the documentation for that device.
5. On your device, touch Scan to scan for other Wi-Fi
Direct devices.
6. Once the device you want to connect to displays,
touch it.
Apps Settings
.