Appliance Break-In; Heat Management - Heatilator NBV3630I-B Owner's Manual

H. Appliance Break-In
Initial Break-in Procedure
• The fireplace should be run three to four hours
continuously on high.
• Turn the fi replace off and allow it to completely cool.
• Remove fi xed glass assembly. See Section 4.B.
• Clean fi xed glass assembly. See Section 4.
• Replace the fi xed glass assembly and run continuously
on high an additional 12 hours.
This cures the materials used to manufacture the fi re-
place.
NOTICE! Open windows for air circulation during fi re-
place break-in.
• Some people may be sensitive to smoke and odors.
• Smoke detectors may activate.
12
Heatilator • NBV3630I-B, NBV3933I-B, NBV4236I-B, NBV4842I-B Owner's Manual • 2376-981 Rev. F • 4/16
I. Heat Management
Heat Output
• Burn Rate
The Novus direct vent models have a variable burn rate
which is controlled by the HI/LO knob on the gas valve.
Therefore the fl ame height is adjustable. The HI/LO knob
is shown in Figure 3.5. It is located in the control cavity
of the appliance.
The HI/LO knob may be adjusted as desired by turning
clockwise to the HI position and by turning counterclockwise
to the LO position.
• Change fan speed
If an optional fan is installed, follow the instructions
included with the fan.
Figure 3.5 Valve - IntelliFire Ignition System
Indicator
LO HI