Tilt-Out Freezer Door Bin; Chilled Door Bin; Tilt-Out Fruit Bin - Kenmore 106.5022 Series Use & Care Manual

Drop-In Door Rails
To Remove and Replace the Rails:
1. Remove the rails by pulling straight up on each end of the rail.
2. Replace the rails by sliding the shelf rail into the slots on the
door and pushing the rail straight down until it stops.

Tilt-out Freezer Door Bin

(on some models)
To Remove and Replace the Bin:
1. Remove the bin by pulling out on the tabs behind the basket to
release it from the door liner.
2. Replace the bin by aligning the tabs with the buttons on the
sides of the door liner. Firmly snap the tabs onto the buttons as
shown.

Chilled Door Bin

(on some models)
Cool air from the freezer is directed to the door bin directly
beneath the vent.
NOTE: The dairy compartment and can rack are not chilled.
Chilled Door Bin Control:
The chilled door bin control is located on the left-hand side of the
refrigerator compartment.
Style 1:
20
Turn the control clockwise (right) to reduce the flow of cold
air to the bin and make it less cold.
Turn the control counterclockwise (left) to increase the flow
of cold air to the bin and make it colder.
Style 2:
A
A. Chilled door bin control
Slide the control to the left to reduce the flow of cold air to
the bin and make it less cold.
Slide the control to the right to increase the flow of cold air
to the bin and make it colder.

Tilt-out Fruit Bin

(on some models)
To Remove and Replace the Bin:
1. Remove the bin by lifting it and pulling it straight out.
2. Replace the bin by sliding it in above the desired supports and
pushing it down until it stops.
To Remove and Replace the Bin Parts:
1. Press either release button to open the tilt-out portion of the bin.
A. Release buttons
2. To remove the tilt-out portion of the bin, press in on the curved
levers on each side of the bin. Pull up and out.
NOTES:
The bin cannot be removed if it is tilted out all the way. Tilt
it only part of the way before pressing the curved levers to
remove it.
A