Freezer Basket Or Bin; Door Features; Tilt-Out Freezer Door Bin; Chilled Door Bin - Kenmore 5890 - 25.4 cu. Ft. Refrigerator Use And Care Manual

Use and care guide
Table of Contents

Advertisement

Available languages

Available languages

_ssstc
b
o__some mode/@
The freezer basket or bin can be used to store bags of frozen
fruits and vegetables that may slide off freezer shelves.
To Remove and Replace the Freezer
Basket or Bin:
1. Remove the basket or bin by sliding it out to the stop.
2. Lift the front to slide the basket or bin out the rest of the way.
/ ed ©oo
Bn
(f>n some
mode_sit
Cool air from the freezer is directed to the door bin directly
beneath the vent.
NOTE: The dairy compartment
and can rack are not chilled.
3. Replace the basket or bin by positioning it on the rails. Lift the
basket or bin front slightly while pushing it in fully past the
stops.
DOOR FEATURES
Your model may have some or all of these features. Features that
can be purchased separately as product accessories are labeled
with the word "Accessory."
Not all accessories will fit all models.
If you are interested in purchasing one of the accessories, please
call the toll-free number on the cover or in the "Accessories"
section.
Chilled Door Bin Control
The chilled door bin control is located on the left-hand side of the
refrigerator compartment.
To Remove and Replace the Bin:
1. Remove the bin by pulling out on the tabs behind the basket
to release it from the door liner.
2. Replace the bin by aligning the tabs with the buttons on the
sides of the door liner. Firmly snap the tabs onto the buttons
as shown.
8 @y
Turn the control clockwise (right) to reduce the flow of cold air
to the bin and make it less cold.
Turn the control counterclockwise
(left) to increase the flow of
cold air to the bin and make it colder.
_' odes
,,_ s>© w
The door rails or bins may be removed for easier cleaning.
Snap-On Door Rails or Bins
To Remove
and Replace the Rails or Bins:
1. Remove the rails or bins by pushing in slightly on the front of
the bracket while pulling out on the inside tab. Repeat these
steps for the other end of the rail or bin.
2. Replace the rails or bins by aligning the ends of the brackets
with the buttons on the sides of the door liner. Firmly snap
bracket onto the tabs above the shelf as shown.
16

Advertisement

Table of Contents
loading

Table of Contents