Panasonic DMC-FX12 Operating Instructions Manual page 56

Advanced (Recording pictures)
• The travel date is cancelled if the
current date is after the return date.
7 Press [MENU/SET] to close the
menu.
8 Take a picture.
1ST DAY
10:00 DEC. 2.2007
A: The number of days that have passed
since the departure date
• The number of days that have passed
since the departure date is displayed for
about 5 seconds if this unit is turned on
etc. after setting the travel date or when
the travel date is set.
• When the travel date is set, [
appears on the lower right of the
screen. (It is not displayed if the current
date is after the return date.)
∫ Cancelling the travel date
The travel date is automatically cancelled if
the current date is after the return date. If
you want to cancel the travel date before
the end of the vacation, select [OFF] on the
4
screen shown in step and then press
[MENU/SET] twice.
• The travel date is calculated using the
date in the clock setting (P15) and the
departure date you set. If you set
[WORLD TIME] (P57) to the travel
destination, the travel date is calculated
using the date in the clock setting and the
travel destination setting.
• The travel date setting is memorised even
if the camera is turned off.
• If you set a departure date and then take a
picture on a date before this departure
56
VQT1C36
date, [-] (minus) is displayed in orange
and the day of the vacation that you took
the picture is not recorded.
• If you set a departure date and then
change the clock setting to the date and
time at the travel destination, [-] (minus) is
displayed in white and the day of the
vacation that you took the picture is
recorded when the travel destination date
3
is, for example, one day before the
departure date.
• If [TRAVEL DATE] is set to [OFF], the
number of days that have passed since
the departure date will not be recorded
even if you set the travel date or the return
date. Even if [TRAVEL DATE] is set to
[SET] after taking the pictures, which day
of the vacation you took them is not
displayed.
• Set the clock if the message [PLEASE
SET THE CLOCK] appears. (P15)
]
• The [TRAVEL DATE] setting also affects
simple mode [ ].