Setting Date/Time (Clock Set); Changing The Clock Setting - Panasonic DMC-FX12 Operating Instructions Manual

Setting Date/Time
(Clock Set)
∫ Initial setting
The clock is not set so the following screen
appears when you turn the camera on.
OFF
PLEASE SET THE CLOCK
MENU
CLOCK SET
A: [MENU/SET] button
B: Cursor buttons
1 Press [MENU/SET].
2 Press 3/4/2/1 to select the
date and time.
:
:
CLOCK SET
00 00 : JAN 11 2007 . .
M/D/Y
CANCEL
SELECT SET EXIT
A: Time at the home area
B: Time at the travel destination (P57)
• 2/1: Select the desired item
• 3/4: Set the display order for the date
and time.
• : Cancel without setting the clock.
3 Press [MENU/SET] several times
to close the menu.
• Turn the camera off after finishing
setting the clock. Then turn it on and
check that the clock setting is correct.

∫ Changing the clock setting

1 Press [MENU/SET].
2 Press 3/4 to select [CLOCK SET].
ON
(P59)
3 Press 1 and then perform steps
3
to set the clock.
• You can also set the clock in the
[SETUP] menu. (P18)
• When a fully charged battery has been
inserted for more than 24 hours, the clock
setting is stored (in the camera) for at
least 3 months even if the battery is
removed. (If you insert a battery that is not
sufficiently charged, the length of time that
the clock setting is stored may become
less.) However, the clock setting is
cancelled after this length of time. In this
case, set the clock again. (P15)
• You can set the year from 2000 to 2099.
The 24-hour system is used.
MENU
.
Preparation
2
and
15
VQT1C36