[Af Mode]; Setting The Focus Method - Panasonic DMC-FX12 Operating Instructions Manual

∫ When the aspect ratio is [
(5.5M) 3072k1728 pixels
(DMC-FX12)
(4.5M) 2816k1584 pixels
(DMC-FX10)
(2M EZ) 1920k1080 pixels
∫ Quality
You can increase the number of recordable
pictures without changing the picture size if
quality is set to [ ].
Fine (Low compression):
This gives priority to picture quality.
Picture quality will be high.
Standard (High compression):
This gives priority to the number of
recordable pictures. Standard
quality pictures are recorded.
• The number of pixels that can be selected
differs depending on the aspect ratio. If
you change the aspect ratio, set the
picture size.
• "EZ" is an abbreviation of
"Extra optical Zoom". (P27)
• The extra optical zoom does not work in
[HIGH SENS.] in scene mode so the
picture size for [EZ] is not displayed.
• Pictures may appear mosaic depending
on the subject and the recording
conditions.
• Refer to P101 for information about the
number of recordable pictures.
• In simple mode [ ], the settings become
as follows.
– [ ENLARGE]:
: (7M) (DMC-FX12)/
(6M) (DMC-FX10)/
– [ 4qk6q/10k15cm]:
: (2.5M EZ)/
– [ E-MAIL]:
: (0.3M EZ)/
].

[AF MODE]

Setting the focus method

MENU MENU
Press [ ] to display the [REC] mode
SET SET
menu and select the item to set. (P59)
Select the mode that matches the
recording conditions and the composition.
5-area-focusing:
The camera focuses on
any of 5 focus areas.
This is effective when
the subject is not in the
centre of the screen.
1-area-focusing (High speed):
The camera quickly
focuses on the subject
in the AF area on the
centre of the screen.
1-area-focusing:
The camera focuses on
the subject in the AF
area on the centre of
the screen.
∫ About [
The picture may stop moving for a
moment before being brought into focus
when you press the shutter button
halfway. This is not a malfunction.
Menu Settings
]
63
VQT1C36