Advertisement
How to Charge the Battery
An exclusive type 12 v nickel cadmium recharge¬
able battery is used in the Scoopic 16 as the
power source for film drive and electric eye.
The
camera functions only when this charged battery
is properly loaded.
A fully charged battery will
provide power for driving eight reels of 100-foot
(30.5-meter) length film at 24 frames per second.
^Since this battery is not charged when you
purchase it, be sure to charge the battery before
loading it into the camera.
Canon Scoopic Battery Charger<S
The exclusive Battery Charger S is used for charg¬
ing the nickel cadmium battery.
Each battery
can be charged simultaneously either in a pair or
singly.
1 Set the voltage switch according to the voltage
I to be used.
For example, in a locale where
the household voltage is 220 v, set the voltage
switch at 200-240 v.
#Be very careful not to make a mistake on the
voltage setting.
0
Insert the battery after matching the + and
^ — markings on the battery with those on the
charger.
Advertisement
