16
ELECTRICAL SYSTEM
16.10
Changing the high beam bulb
Note
Damage to reflector Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before
mounting.
–
Plug connector
Low beam (H11/socket PGJ19-2) (
–
Position headlight bulb
The headlight bulb is locked into the bulb socket.
S00298-10
Finishing work
–
Refit the headlight mask with the headlight. (
–
Install the wind shield. (
–
Install the mask spoiler.
–
Install the tank cover. (
–
Install the front side cover. (
–
Mount the seat. (
–
Check the headlight setting. (
Preparatory work
–
Switch off all power consumers and switch off the engine.
2
into the new headlight bulb.
p. 207)
1
into the bulb socket and turn it all the way clockwise.
p. 130)
x
(
p. 123)
p. 128)
p. 119)
p. 107)
p. 172)
p. 167)
169