Disassembly; Attachment Of Cpc-9 Jig - Sony DSC-S70 Service Manual

• This set can be disassembled in the order shown below.
DSC-S70
2-1. FRONT CABINET BLOCK ASSEMBLY
(page 2-2)
2-2. LCD HOLDER AND FLASH UNIT
(page 2-2)
2-3. BATTERY LID ASSEMBLY AND
SPEAKER (page 2-3)
2-4. CONTROL SWITCH BLOCK AND
FRONT PANEL (page 2-3)

• ATTACHMENT OF CPC-9 JIG

CPC lid
BT holder
assembly
CPC lid
(Note 3)
SECTION 2

DISASSEMBLY

2-5. MS-54 BOARD AND BT HOLDER
ASSEMBLY (page 2-4)
2-6. LENS BLOCK ASSEMBLY
(page 2-4)
2-7. SY-58 BOARD AND DD-141
BOARD (page 2-5)
2-8. CONTROL SWITCH BLOCK,
PD-128 BOARD AND INDICATOR
MODULE (page 2-6)
2-9. SL-56 BOARD
(page 2-7)
SY-58 board
(CN709)
CPC-9 jig (J-6082-393-C)
(13P flexible board)
(Note 1, 2)
Note 1: Don't use the 12 pin flexible board of CPC-9 jig.
It causes damage to the unit.
Note 2: The old CPC-9 jig (Parts code: J-6082-393-B) Cannot be used,
because it cannot operate the adjustment remote commander.
Note 3: In removing the CPC lid, start from the upper side.
2-1
DSC-S70
SERVICE POSITION
(page 2-5)
SERVICE POSITION
(page 2-6)
Open the battery
lid assembly.