Disassembly - Sony DSC-M2 Service Manual

The following flow chart shows the disassembly procedure.

2-1. DISASSEMBLY

1
3
4
5
1 Four screws (M1.7x3) 4 Harness (MA-155)
2 P cabinet (C) assembly 5 P cabinet (M) assembly
3 Harness (PD-135)
DSC-M2
1
3
4
2
1 Four screws (M1.7x3)
2 Screw (M1.7x4)
3 Raise the multi connector side of the cabinet (front) assembly
in the direction of the arrow, and remove the claw.
4 Cabinet (front) assembly
2
1
3
5
7
1 Two screws (M1.7x3)
2 Microphone holder
3 Two Microphones (MIC901, MIC902)
4 Control switch block (PB80100)
5 Screw (M1.7x3)
2-1
2. DISASSEMBLY
Caution
Shorting jig
(1k Ω / 1W)
1
3
1 Discharging the capacitor
1
2
HELP 01
6
4
6 LCD unit, PM-046 board
7 P cabinet (M) assembly
2
3
4
Capacitor
1 Remove the speaker from the two claws.
2 Peel off the CD electric heat sheet.
3 FP-305 flexible board
4 Flexible board (from the FP-299 flexible board)
5 Lens section
Note: Be very careful not to
damage the flexible board.
1
2
1 Connector
2 Flash unit (FL80100)
2-2
5
1
A (See page 2-3)