Unbalance Error - Kenmore 796.4044*9 Series Service Manual

UNBALANCE ERROR

Is displayed?
Yes
Does the laundry lean
toward one side, not evenly
put in the DRUM assembly?
No
Is the washing machine
installed at an angle?
[Note] Environmental check list
1) Removal of transportation-based fixed bolt.
2) Confirmation on the material to see if it is capable
of handling two different types of blanket materials.
Put laundry
evenly
Yes
In the DRUM
assembly
Adjust the
Yes height of
washing
machine
to be kept
horizontally
29
OVER FLOW ERROR
Is displayed?
Yes
While a cycle is running,
press the WASH/RINSE and
DELAY START buttons
together to display the water
level. Is the water level
>213? (Refer to 7-3)
Yes
Unplug the washer. Does
the water valve remain on
when the power is removed
from the washer?
Yes
Replace the
INLET VALVE ASSEMBLY
Check the AIR
CHAMBER
No
and the tube
(clogged).
If the water
valve is
energized as
No
soon as the
washer is
plugged in or
when the power
button is
pressed, replace
the main PCB.