Troubleshooting; Error Mode Summary - Kenmore 796.4107 31 Series Service Manual

8.TROUBLESHOOTING

8-1. SAFE Y CAU ION
here’s built-in AC 120V and DC power in output terminal of PWB assembly in common. Be careful
electric shock when disconnecting parts while trouble shooting. (Wear Electro Static Discharge gloves
when working.)
After cutting off the power when changing PWB assembly, disconnect or assemble.
Be careful static when handling PWB assembly, and use Electro Static Discharge plastic pack when
delivering or keeping it.
8-2. ERROR MODE SUMMERY
If you press the S AR /PAUSE button when an error is displayed, any error except
disappear and the machine will go into the pause status.
In case of ,
if the error is not resolved within 4 min., power will be turned off automatically and the error code will
blink. But in the case of
RROR
WA ER INLE
1
ERROR
UNBALANCE
2
ERROR
DRAIN
3
ERROR
OVER FLOW
4
ERROR
PRESSURE
5
SENEOR
ERROR
DOOR OPEN
6
ERROR
HEA ING
7
ERROR
, if the error is not resolved within 20 sec., or the in case of other errors,
, power will not be turned off.
SYMPTOM
• Correct water level (246) is not reached within 8 minutes
after water is supplied or it does not reach the preset water
level within 25 minutes.
• he load is too small.
• he appliance is tilted.
• Laundry is gathered to one side.
• Non distributable things are put into the drum.
• Not fully drained within 10 minutes.
• Water is overflowing (water level frequency is over 213).
• he SENSOR SWI CH ASSEMBLY is out of order.
• Door not all the way closed.
• Loose electrical connections at Door switch and PWB
Assembly.
• he DOOR SWI CH ASSEMBLY is out of order.
• he HERMIS OR is out order.
CAUS
If is displayed, the drain pump will operate to drain
the water automatically.
24
will