Table of Contents
Advertisement
s
Get current status (small 's')
Response Example:
Current_Status: W= 17.14 Tr= 6.65 Cv= 0.00 M=F A=I S= 0
Legend: Current (gross) weight=17.14, Last Tare=6.65,
Next Correction Value=0.00, Mode=Fill mode,
Activity= I dle (or: T are, F ast, S low)
System staus=0 (0 is normal, otherwise it's an error code).
p
Get parameters list (small 'p').
i
Turn off the "Get results immediately" feature.
I
Turn on the "Get results immediately" feature.
V
Get current mode (upper case V).
Board's response: 'Fill-mode'.
Note: This command is useful in order to find out board's
mode. In the general mode the response to the 'V' command
is 'LCIC-WIM/V#.##' (refer to section 4.1/i), as opposed to
the 'Fill-mode' response in the fill mode.
78
Advertisement
Table of Contents
Need help?
Do you have a question about the High Speed Load Cell Interface Card LCIC-WIM-BEN and is the answer not in the manual?