Omega Engineering High Speed Load Cell Interface Card LCIC-WIM-BEN User Manual page 36

23 Becomes effective only after a system reset (either
24 Becomes effective only after a system reset (either
Becomes effective only after a system reset (either
25
101 Becomes effective only after a system reset (either
Becomes effective only after a system reset (either
102
103 Becomes effective only after a system reset (either
General Setpoint4.
Becomes effective only after a system reset (either
104
111 Becomes effective only after a system reset (either
112 Becomes effective only after a system reset (either
113 Becomes effective only after a system reset (either
114 Becomes effective only after a system reset (either
Baud rate for the RS232/RS485 port.
Possible values:
19200, 28800, 38400, 57600, 115200.
115
Note
The baud rate for the USB need not be defined –
its upper limit is 921,600.
power off/on or using the 'S' command).
power off/on or using the 'S' command).
power off/on or using the 'S' command).
power off/on or using the 'S' command).
power off/on or using the 'S' command).
power off/on or using the 'S' command).
power off/on or using the 'S' command).
Output1 Mode 0=manual, 1=general
power off/on or using the 'S' command).
Output2 Mode 0=manual, 1=general
power off/on or using the 'S' command).
Output3 Mode 0=manual, 1=general
power off/on or using the 'S' command).
Output4 Mode 0=manual, 1=general
power off/on or using the 'S' command).
35
Filter1 value: 2-256.
Filter2 value: 2-256.
Decimator: 1-1000.
General Setpoint1.
General Setpoint2.
General Setpoint3.
setpoint.
setpoint.
setpoint.
setpoint.
Float
Float
Float
Float
Float
Float
Float
Float
Float
Float
Float
Float